Water Pollution and Nanotechnology

How can nanotechnology be used to reduce water pollution?

Nanotechnology is being used to develop solutions to three very different problems in water quality.

One challenge is the removal of industrial water pollution, such as a cleaning solvent called TCE, from ground water. Nanoparticles can be used to convert the contaminating chemical through a chemical reaction to make it harmless. Studies have shown that this method can be used successfully to reach contaminates dispersed in underground ponds and at much lower cost than methods which require pumping the water out of the ground for treatment.

The challenge is the removal of salt or metals from water. A deionization method using electrodes composed of nano-sized fibers shows promise for reducing the cost and energy requirements of turning salt water into drinking water.

The third problem concerns the fact that standard filters do not work on virus cells. A filter only a few nanometers in diameter is currently being developed that should be capable of removing virus cells from water.

Pollution Discription

Agricultural Run off

The use of land for agriculture and the practices followed in cultivation greatly affect the quality of groundwater. Intensive cultivation of crops causes chemicals from fertilizers (e.g. nitrate) and pesticides to seep into the groundwater, a process commonly known as leaching. Routine applications of fertilizers and pesticides for agriculture and indiscriminate disposal of industrial and domestic wastes are increasingly being recognized as significant sources of water pollution.

The high nitrate content in groundwater is mainly from irrigation run-off from agricultural fields where chemical fertilizers have been used indiscriminately.

Industrial effluents

Waste water from manufacturing or chemical processes in industries contributes to water pollution. Industrial waste water usually contains specific and readily identifiable chemical compounds. During the last fifty years, the number of industries in India has grown rapidly. But water pollution is concentrated within a few subsectors, mainly in the form of toxic wastes and organic pollutants. Out of this a large portion can be traced to the processing of industrial chemicals and to the food products industry. In fact, a number of large- and medium-sized industries in the region covered by the Gangs Action Plan do not have adequate effluent treatment facilities. Most of these defaulting industries are sugar mills, distilleries, leather processing industries, and thermal power stations. Most major industries have treatment facilities for industrial effluents. But this is not the case with small-scale industries, which cannot afford enormous investments in pollution control equipment as their profit margin is very slender.

Effects of water pollution

The effects of water pollution are not only devastating to people but also to animals, fish, and birds. Polluted water is unsuitable for drinking, recreation, agriculture, and industry. It diminishes the aesthetic quality of lakes and rivers. More seriously, contaminated water destroys aquatic life and reduces its reproductive ability. Eventually, it is a hazard to human health. Nobody can escape the effects of water pollution.

The individual and the community can help minimize water pollution. By simple housekeeping and management practices the amount of waste generated can be minimized.

Water Pollution Decades

Over the last several decades, water quality management in the United States has focused on control of point sources of pollution and the use of effluent- (discharge-) based water quality standards. Although the quality of U.S. waters has generally improved, nonpoint sources of pollution have not been as successfully controlled. To help confront this disparity, the U.S. Environmental Protection Agency (EPA) implements the Total Maximum Daily Load (TMDL) program'the objective of which is attainment of ambient water quality standards through the control of both point and nonpoint sources of pollution. Produced in response to a request from the U.S. Congress, Assessing the Total Maximum Daily Load Approach to Water Quality Management recommends two major programmatic changes in the TMDL process.

Over the past 20 years, scientists, coastal managers, and government decision-makers have come to recognize that coastal ecosystems suffer a number of environmental problems that can, at times, be attributed to the introduction of excess nutrients from upstream watersheds. Nutrient over-enrichment is the common thread linking such diverse coastal problems as fish kills, outbreaks of shellfish poisonings, coral reef destruction, and the Gulf of Mexico's "dead zone." Nutrient sources include runoff from agricultural land, animal feeding operations, and urban areas as well as discharge from waste water treatment plants and atmospheric deposition of compounds released during the burning of fossil fuels. Clean Coastal Waters: Understanding and Reducing the Effects of Nutrient Pollution , produced jointly by the WSTB and the Ocean Studies Board of the NRC, concludes that the federal government together with state and local agencies should develop a comprehensive national strategy to combat nitrogen and phosphorus pollution in coastal waters . Success in addressing coastal nutrient problems depends on having a solid scientific understanding of the causes of the problem and the full range of possible management alternatives. To this end, the report describes a number of initiatives that could help address nutrient overabundance.

Research;
Environmental problems in coastal ecosystems can sometimes be attributed to excess nutrients flowing from upstream watersheds into estuarine settings. This nutrient over-enrichment can result in toxic algal blooms, shellfish poisoning, coral reef destruction, and other harmful outcomes. All U.S. coasts show signs of nutrient over-enrichment, and scientists predict worsening problems in the years ahead. This report explains technical aspects of nutrient over-enrichment and proposes both immediate local action by coastal managers and a longer-term national strategy incorporating policy design, classification of affected sites, law and regulation, coordination, and communication.

cause of Pollution

Many causes of pollution including sewage and fertilisers contain nutrients such as nitrates and phosphates. In excess levels, nutrients over stimulate the growth of aquatic plants and algae. Excessive growth of these types of organisms consequently clogs our waterways, use up dissolved oxygen as they decompose, and block light to deeper waters.
This, in turn, proves very harmful to aquatic organisms as it affects the respiration ability or fish and other invertebrates that reside in water.
Pollution is also caused when silt and other suspended solids, such as soil, wash off plowed fields, construction and logging sites, urban areas, and eroded river banks when it rains. Under natural conditions, lakes, rivers, and other water bodies undergo Authentication, an aging process that slowly fills in the water body with sediment and organic matter. When these sediments enter various bodies of water, fish respiration becomes impaired, plant productivity and water depth become reduced, and aquatic organisms and their environments become suffocated. Pollution in the form of organic
material enters waterways in many different forms as sewage, as leaves and grass clippings, or as run-off from livestock feed lots and pastures. When natural bacteria and protozoan in the water break down this organic material, they begin to use up the oxygen dissolved in the water. Many types of fish and bottom-dwelling animals cannot survive when levels of dissolved oxygen drop below two to five parts per million. When this occurs, it kills aquatic organisms in large numbers which leads to disruptions in the food chain.


CLASSIFYING OF WATER POLLUTION
The major sources of water pollution can be classified as municipal, industrial, and agricultural. Municipal water pollution consists of waste water from homes and commercial establishments. For many years, the main goal of treating municipal
waste water was simply to reduce its content of suspended solids, oxygen-demanding materials, dissolved inorganic compounds, and harmful bacteria. In recent years, however, more stress has been placed on improving means of disposal of the solid residues from the municipal treatment processes. The basic methods of treating municipal waste water fall into three stages: primary treatment, including grit removal, screening, grinding, and sedimentation; secondary treatment, which entails oxidation of dissolved organic matter by means of using biologically active sludge, which is then filtered off; and tertiary treatment, in which advanced biological methods of nitrogen removal and chemical and physical methods such as granular filtration and activated carbon absorption are employed. The handling and disposal of solid residues can
account for 25 to 50 percent of the capital and operational costs of a treatment plant. The characteristics of industrial waste waters can differ considerably both within and among industries. The impact of industrial discharges depends not only on their collective characteristics, such as biochemical oxygen demand and the amount of suspended solids, but also on their content of specific inorganic and organic substances. Three options are available in controlling industrial waste water. Control can take place at the point of generation in the plant; waste water can be pre-treated for discharge to municipal treatment sources; or waste water can be treated completely at the plant and either reused or discharged directly into receiving waters.

Pollution

Water pollution is the contamination of water bodies such as lakes, rivers, oceans, and groundwater. All water pollution affects organisms and plants that live in these water bodies and in almost all cases the effect is damaging either to individual species and populations but also to the natural biological communities. It occurs when pollutants are discharged directly or indirectly into water bodies without adequate treatment to remove harmful constituents.

Water is Essential for LifeIt covers 71% of the earth's surface and makes up 65 % of our bodies. Everyone wants clean water-- to drink, for recreation, and just to enjoy looking at. If water becomes polluted, its loses its value to us economically and aesthetically, and can become a threat to our health and to the survival of the fish living in it and the wildlife that depends on it.
How does water pollution occur?Although some kinds of water pollution can occur through natural processes, it is mostly a result of human activities. We use water daily in our homes and industries, about 150 gallons per day per person in the United States. The water we use is taken from lakes and rivers, and from underground (groundwater); and after we have used it-- and contaminated it-- most of it returns to these locations.
The used water of a community is called wastewater, or sewage. If it is not treated before being discharged into waterways, serious pollution is the result. Historically, it has taken humanity quite a bit of time to come to grips with this problem. Water pollution also occurs when rain water runoff from urban and industrial areas and from agricultural land and mining operations makes its way back to receiving waters (river, lake or ocean) and into the ground

How do we prevent water pollution?
To keep our used water from spoiling our water resources, we have to remove the pollutants before the water gets back into the environment. In urban areas in most developed countries, the wastewater from homes, businesses and factories is collected by a system of underground pipes-- sewers-- which carry it to one or more central treatment facilites. Most of these are located near bodies of water into which the treated wastewater is discharged.
In the U.S., all such facilites must have a permit issued by the federal and/or state government, describing limits on the amounts of various pollutants which may be discharged. The U.S. EPA (Environmental Protection Agency) refers to these as NPDES (National Pollutant Discharge Elimination System) permits. Industries located in areas where they are not connected to a sewer can discharge directly into a waterway, but will need a permit, and will probably have to have their own treatment plants. Even industries which are connected to sewers may have to pretreat their wastewaters before discharging them into the sewers, because they may contain materials which will harm the sewers or the treatment plants-- or may be a danger to the people who work in maintaining the sewer system.[If you are some one who works in an industrial pretreatment program, you may be aware that the USEPA has recently (July 22, 1999) proposed a series of changes to the current regulations. I have prepared a summary of the proposals which you may find helpful before reading the entire document.]
Homes in non-urban areas that are not connected to a sewer are usually required by their town to have on-site treatment systems. Most common for single homes are septic systems, which consist of a buried tank connected to a set of perforated pipes, embedded in gravel, which distribute the water into the soil. (The "Links" page has several references on this subject.) Larger housing complexes may have treatment systems based on the principles used in full-scale sewage treatment plants

Abaut Water pollution

Definition ;- Pollution is the introduction of contaminants into an environment that causes instability, disorder, harm or discomfort to the ecosystem i.e. physical systems or living organisms .[ Pollution can take the form of chemical substances, or energy, such as noise, heat, or light. Pollutants, the elements of pollution, can be foreign substances or energies, or naturally occurring; when naturally occurring, they are considered contaminants when they exceed natural levels. Pollution is often classed as point source or non point source pollution. The Blacksmith Institute issues annually a list of the world's worst polluted places.

Water pollution refers to the addition of foreign substances (pollutants) to a water source. These impurities have a detrimental effect on water quality, and can be harmful to living organisms and aquatic life. Pollution can be introduced to water from both point sources and diffuse sources. Common sources of pollutants include man-made industrial waste and domestic sewage, and natural sources such as soil erosion and silt-bearing run-off.